Publishing a dataset

How to take an event from an FDSN archive to a hash-pinned entry in specmod.datasets.REGISTRY. Written to be followed end to end in one sitting.

Datasets are versioned by registry name — magna_2020_v1 and magna_2020_v2 are separate entries — so a published result pinned to v1 keeps fetching v1 after v2 exists. Nothing here ever revises an entry in place.

Before you start

  • Network access to the data centres named in the config (IRIS for waveforms, USGS for the catalogue, in Magna’s case).

  • Push access to the repository, and permission to create releases.

  • specmod installed from the working tree: uv pip install -e '.[dev]'.

  • pyproject.toml’s tag_regex in place — it has been on main since v0.2.0. Step 3 creates a data-v1 tag, and without that constraint the tag silently becomes the package’s version number. See “Why the tag prefix matters” below.

1. Fetch

specmod fetch datasets/magna_2020.toml -o build/magna_2020

This is the only command in the project that touches the network. It resolves the hypocentre from the catalogue service named in the config, expands the station wildcards against the data centre, cuts each channel to the window relative to origin, and writes an EventDirectory with a manifest.json beside it.

Expect it to take a few minutes — Magna is 88 stations across seven networks.

Check the manifest before going further. It records what came back, not just what was asked for, and this is the moment to read it:

python -m json.tool build/magna_2020/manifest.json | head -40

  • event.origin, event.latitude/longitude/depth_km — check these against the USGS event page for uu60363602 rather than against memory. The config resolves the hypocentre from ComCat by id, so a wrong id gives a confidently wrong event rather than an error, and nothing downstream would notice.

  • channels — the list after wildcard expansion. HH* does not tell you what you got; this does. A much shorter list than expected usually means a network was not open at that time, not that the request was malformed.

  • data_centre, obspy_version, specmod_version, fetched_at — the provenance that makes the response reproducible-ish. It cannot be fully reproducible: FDSN is not content-addressed, archives get backfilled and catalogue solutions revised.

If any of that is wrong, fix the config and re-fetch. The artefact is about to become immutable.

2. Archive and hash

tar -czf magna_2020_v1.tar.gz -C build magna_2020
shasum -a 256 magna_2020_v1.tar.gz

Two things that matter about this command:

  • -C build magna_2020 so the tarball contains a single top-level directory. pooch.Untar unpacks it into the cache and datasets.load() expects that one directory; a tarball of loose files lands them in the cache root.

  • The digest is the pin. Keep the output of shasum — it goes in the registry entry, and it is what makes a corrupted or substituted download fail loudly instead of being analysed quietly.

Sanity-check the size before uploading. GitHub release assets are capped at 2 GB, and anything over a few hundred MB is worth reconsidering as a dataset.

3. Publish

Create a release tagged data-v1 — not v1, not 1.0 — and attach the tarball.

gh release create data-v1 magna_2020_v1.tar.gz \
  --title "Data release 1" \
  --notes "Magna, Utah, Mw 5.7, 2020-03-18. 88 stations, raw counts plus
response. Built with: specmod fetch datasets/magna_2020.toml"

Or through the web UI: Releases → Draft a new release → tag data-v1 → attach → publish.

Then copy the asset’s download URL. It looks like:

https://github.com/sgjholt/SpecMod/releases/download/data-v1/magna_2020_v1.tar.gz

Why the tag prefix matters

data- is not decoration. Two things in this repository read tags, and both have to be told that data tags are not code releases:

  • hatch-vcs, which derives specmod.__version__ from git describe. setuptools-scm’s default tag_regex has an optional (?:[\w-]+-)? prefix group, so it strips data-, reads the remaining v1 as a version, and the package reports 1. Measured on this repository: 0.1.0.post1.dev173 before the tag, 1 after it. pyproject.toml now constrains both git_describe_command (--match "v[0-9]*") and tag_regex, and tests/test_versioning.py pins it.

  • release-please, which is wired up and has cut three releases. It is configured manifest-first — .release-please-manifest.json is the source of truth — rather than inferring the last release by scanning tags, which is what keeps a data-v1 tag from being read as a code release and offered as 2 next. include-component-in-tag is false, so its tags are plain v*. See Releasing the software.

If the release feed gets noisy with data tags, the fallback in §5.2.3 of the plan is a sibling sgjholt/specmod-data repository holding assets only — a repo, not a package, so no extra release cycle for code.

4. Register

Two additions to src/specmod/datasets.py, landing in the same change as the asset they point at — never before. A load_magna_2020() that can only 404 is worse than its absence.

First the event itself. Only PNR_2019 exists today, and DatasetSpec needs an Event. Take the values from the manifest, not from the paper or a web page, so that the constant and the artefact cannot disagree:

MAGNA_2020 = Event(
    origin="2020-03-18T13:09:31.000000Z",   # from manifest.json
    latitude=...,
    longitude=...,
    depth_km=...,
    catalogue_magnitude=5.7,
    catalogue_magnitude_type="Mw",
)

Then the registry entry:

REGISTRY: dict[str, DatasetSpec] = {
    "magna_2020_v1": DatasetSpec(
        name="magna_2020_v1",
        url="https://github.com/sgjholt/SpecMod/releases/download/data-v1/magna_2020_v1.tar.gz",
        sha256="sha256:<the digest from step 2>",
        event=MAGNA_2020,
        # Only if the event directory is nested inside the tarball rather than
        # being its single top-level directory. Following step 2, it is not.
        # member="",
    ),
}

Then verify it end to end from a cold cache:

SPECMOD_DATA_DIR=$(mktemp -d) python -c "
from specmod.datasets import load
d = load('magna_2020_v1')
print(len(d.stream()), 'traces')
print(d.inventory())
print(d.catalog())
"

A second run against the same SPECMOD_DATA_DIR should print the same thing without downloading — that is pooch’s cache working, and it is what CI relies on.

5. Test

Tests needing a fetched dataset are marked, so that pytest -m "not dataset" stays a complete offline run:

@pytest.mark.dataset
def test_magna_loads() -> None:
    dataset = load("magna_2020_v1")
    ...

Run them once locally (pytest -m dataset), then confirm the offline suite is still complete (pytest -m "not dataset").

If something goes wrong

The digest does not match on download. Re-hash the local tarball. If it matches locally but not through pooch, the upload was truncated — delete the asset and re-attach it. Never “fix” this by updating the hash to whatever arrived.

You need to change a published artefact. You do not change it; you publish data-v2 and add a magna_2020_v2 entry. The old entry stays and keeps working, which is the entire reason versioning is by registry name.

The tag went out without the data- prefix. Delete the tag and the release (gh release delete v1 --cleanup-tag), confirm hatchling version reports a 0.1.0.post* string again, and re-publish under the right name. Anyone who built a wheel in between got a wrongly-versioned one.

load() says “Unknown dataset”. The registry entry is not in the installed copy of the package — likely an editable install pointing elsewhere, or the entry was added but not saved.